BYNFR - 570 TM6045
- MSDS: BYNFR
- Manufacturer: TACONIC PROCESS MATERIALS DIV
- Product Name: 570 TM6045
- National Stock Number: 6850-00F046591
Product Identification
Product ID:570 TM6045
MSDS Date:06/01/1992
FSC:6850
NIIN:00F046591
MSDS Number: BYNFR
Responsible Party
SANTA MARIA, CA 93455-5000
US
Emergency Phone: 800-832-0982
Info Phone: 800-832-0982
Cage: 0VB34
Contractor
Telephone: 800-832-0982
Cage: 0VB34
Ingredients
POLYETHYLENE TERAPHTHALATE
CAS: 25038-59-9
RTECS: TR2725000
Fraction By Weight: 40%
SILICONE RUBBER
Fraction By Weight: 60%
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MOLTEN MATERIALS WILL PRODUCE
THERMAL BURNS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:THERMAL BURNS.
First Aid
First Aid:SKIN: IF BURNED BY MOLTEN MATERIALS, COOL QUICKLY AS POSSIBLE
W/WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES. NOTE TO PHYSICIAN:
BURNS SHOULD BE TREATED AS THERMAL BURNS. PRODUCTS ARE POLYMERS OF
LOW TOXICITY, THEREFORE, THERE IS NO URGENTNEED TO REMOVE FROM THE
SKIN BECAUSE OF CONCERN ABOUT TOXICITY.
Fire Fighting
Flash Point Method:COC
Flash Point:525F
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, CO2
Fire Fighting Procedures:WEAR SCBA & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:REFER TO NFPA PAMPHLET NO 654, IF THIS
MATERIAL IS REDUCED TO/COLLECTED AS A POWDER.
Accidental Release
Spill Release Procedures:PRODUCT MAY BE AESTHETICALLY UNPLEASANT,
THEY'RE NOT EXPECTED TO HAVE ANY ADVERSE ENVIRONMENTAL IMPACT.
Handling
Handling and Storage Precautions:THEY ARE EXPECTED TO BE RESISTANT TO
BIODEGRADATION BUT ARE UNLIKELY TO BIOCONCENTRATE.
Other Precautions:PRODUCTS ARE EXPECTED TO CAUSE LITTLE OXYGEN
DEPLETION IN AQUATIC SYSTEMS. THEY ARE EXPECTED TO HAVE A LOW
POTENTIAL TO AFFECT AQUATIC ORGANISMS, SECONDARY WASTE TREATMENT
MICROORGANISMS & THE GERMINA TION & GROWTH OF PLANTS.
Exposure Controls
Respiratory Protection:NONE SHOULD BE NEEDED.
Ventilation:NORMAL WORKING AREA.
Protective Gloves:NONE REQUIRED
Eye Protection:NONE REQUIRED
Other Protective Equipment:NONE REQUIRED.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:1.32
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TRANSPARENT PINK W/NO APPRECIABLE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS CAN CAUSE A VIGOROUS REACTION.
Hazardous Decomposition Products:CO2, CO
Disposal
Waste Disposal Methods:INCINERATION/LANDFILL. DISPOSE OF IAW/FEDERAL,
STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.